Home/Answers/Budget
DUCT CLEANING COST LAB / Budget

Budget for Beginners

For your first Budget task, do not change many settings: run defaults once, then adjust one item at a time.

Updated 2026-11-03About 3 minLocal test
Quick answer

For your first Budget task, do not change many settings: run defaults once, then adjust one item at a time. Budget = inspection + cleaning + sanitation + filters; keep repair.

Why it matters

Change one variable at a time so you know which setting matters.

Inspection.

Step by step

  1. Check system/contamination/pets/allergies/mold/dryer.
  2. Separate ducts/dryer/coils/air purification/testing.
  3. Get 2-3 quotes; confirm scope/equipment/photos.
  4. Contract states scope/acceptance/payment/warranty.

Common mistakes

  • Low price only, not scope/equipment.
  • Not confirming contamination/mold/asbestos.
  • No before/after evidence.
  • No acceptance/warranty terms.

Checklist

  • System/contamination/pets/allergies/mold.
  • Ducts/dryer/coils/purification.
  • Scope/equipment/photos/acceptance.
  • Contract/payment/warranty.
  • Budget/frequency/maintenance.

Who it is for

If this is your first Budget, narrow by Inspection. and Cleaning. first, then look at specific models.

Key facts

  • Inspection.
  • Cleaning.
  • Filters.

FAQ

How do I start with Budget?

For your first Budget task, do not change many settings: run defaults once, then adjust one item at a time. Budget = inspection + cleaning + sanitation + filters; keep repair.

How long does it take?

Usually 1-3 minutes; for intermittent issues, run 30 seconds and retest elsewhere.

Is data uploaded?

Runs locally and does not upload video/audio; extensions may still read the page.

Source: NADCA